Click image to view full size image
2-3 t/h XGJ560 rice husk pellet making line / biomass pellet production line
Description
YULONG Complete rice husk pellet plant is designed by us as per your raw materials: such as rice husk, wood logs, wood chips, sawdust and so on.
Rice husk pellets without any bond capacity:2-3 T/H
Rice husk pellet diameter:4-12mm
CE patent rice husk pellet machine (efficient centrifugal pellet machines XGJ560). It is unique designed
pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die
pellet machine.This complete rice husk pellet plant includes: hammer mill, Mixer, two efficient centrifugal
pellet machines XGJ560, Cooler, Screener,packing machine belt conveyors, electric control panel and
so on.
Pelletizing Process of the complete wood pellet production line:
1. Chipping&Crushing:
In the wood pellet plant before raw materials are made into biomass pellets, they are first reduced into
much smaller, uniformly-sized particles. When the thickness is larger than 10 mm or size is greater than
50*50 mm, a wood chipper is needed to chip these materials into smaller pieces. The hammer mill is then used to further crush these small pieces into particles of less than 3 mm in
diameter.
2. Drying:
After raw materials are crushed a dryer is needed since most raw wood materials have a moisture content
of about 50%. However, the optimal moisture content for pelletiztion is 13%-15%. Therefore a rotary
dryer is included in the wood pellet plant to reduce the moisture content. After crushing and drying you
can begin making wood pellets.
3. Pelletizing:
After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing
machine or press is the key piece of machinery in the wood pellet plant. It should be mentioned that
impurities in the raw materials like metal or stone,may damage the die and rollers of wood pellet making machine.
4. Cooling:
Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and the moisture
content is close to 15%. For storage purposes, a cooler must be used to reduce their surface
temperature and moisture content.
5. Packing:
Finally is the packing process. In order to protect the wood pellets becoming getting damp and to
increase storability, proper packing is necessary. Here we provide you with the best domestic Semi-Auto
Packing Machine.
Features:
1. Widely used for large scope of raw material, such as wood chips,sawdust, straw,grass,rice husk,
pasture,palm leaf etc.
2. With magnet and over load protection system, which can protec
Nulti Function Biomass Pellet Production Line Rice Husk Pellet Making Machine
